|
|
Kindergarten
Vejr, Tomáš ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The thesis solves the project of a kindergarten in the field of inclination 7%. The kindergarten is located on the plots number 570, st. 373, st. 374 in the village Vrané nad Vltavou. The building has two floors and one basement. The kindergarten is for 60 children and for 11 employees. The building serves as a preschool institution for raising children. The supporting structure consists of a precast concrete frame supplemented in the basement by a cast-in-place wall and a foundation slap. External walls and partitions form sand-lime bricks Sendwich. The external walls are completed with Orsilt TF Profi mineral insulation th. 280 mm. The floors are made of prestressed concrete floor slabs Spiroll PPD 256 th. 250 mm supported by T and L primary beams. The building ends with a could extensive green roof. The slope and space for the blow-in insulation Climatizer Plus uses Steico Joist 400 I-beams. Windows are wooden frame Optiwin Purista and doors are Optiwin Entrada.
|
|
|
In an Apartment in a small town, Mikulov
Solár, Michal ; Kozelský, Tomáš (referee) ; Hora, Jan (advisor)
The concept is based on the historical development of the plot and the city as such. Historically, the area has been defined by self-help and without clearly specified dogmatic guidelines. It is thanks to this that the city is enriched with moments that do not fulfill only the aesthetic or spiritual, but also the functional nature of the city. The moment of surprise and certain visas enriches the interior of the yard as well as the city. At first glance, such annoying spaces have a certain quality, caused by the play of light or the overall concept of space. An important feature of the object is the moment of surprise from the perceived space. The transition from a clearly defined ground floor to the rear, at first glance, irrational courtyard is enhanced by a passage, which also refers to the typical division of the small town house. ARCHITECTURAL SOLUTION The principle of layering of individual spaces clearly reflects the moments of surprise. By specific fragmentation of the building, a character that resembles rather a family house as a residential object, spaces of different quality and utilization are created. The lower dwellings have a spatially and optically separated garden from the total mass, with the top terrace being terraces which are optically linked to the courtyard, but are not accessible to the public. The apartments in the attic have mostly urban character. This creates the principle of co-existence, which is typical of the whole area of the city. The layering is evident in the distribution of flats with different connections to gardens and terraces as well as the variety of housing units. The spirit of the place is a standing cellar that reflects the historical transformation of the parcel and is a symbol of the locality.
|
|
|
Family house
Diatel, Bohumil ; Beranová, Iveta (referee) ; Matějka, Libor (advisor)
Topic of this bachelor thesis is project of family house in Bojkovice on Pitínská street. House is designed for four members family. The building has ground floor, first floor and basement with inbuilt garage and terrace. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal constructions are also designed according to Porotherm system. Roof construction of the object is composed by two flat roofs. The object is settled into slightly sloping terrain. Drawings were worked out in software AutoCAD. The part of the project is a thermal technical analysis, acoustic and fire safety review.
|
|
| |
|
|
Hotel
Belatka, Martin ; Bartolšicová, Eva (referee) ; Matějka, Libor (advisor)
This diploma thesis solves a hotel in Třebíč, street Svabinského. The hotel is designed as four-storey, building with a basement, with warm flat roof over the fourth floor and terrace on the fourth floor. The hotel has 20 rooms with a total capacity of 44 persons. In the hotel is a restaurant for guests hotel. External walls in basement are made of concrete blocks. External walls in above-ground floors are made of brick blocks Heluz with external thermal insulation. Plot is planar. Part of the design is thermal assessment, accustic assessment and fire safery assessment.
|
|
|
Apartment building
Kadlec, Michal ; Hnízdilová, Aneta Aya (referee) ; Daněk, Lukáš (advisor)
The content of this bachelor thesis is the design of the new apartment building in the town of Velké Meziříčí. It is an object with four above-ground floors and a abasement. The vertical supporting structures are designed from ceramic masonry, in the basement from monolithic reinforced concrete. The object will be covered with a pitched roof. The design documentation has been prepared according to the valid legal technical regulations.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Detached house
Urban, Kamil ; Hlavsa, Petr (referee) ; Kolář, Radim (advisor)
The topic of this Bachelor thesis is an elaboration of technical documentation for a project of new family house. The house is partly a basement and it has two floors. The building is designed with traditional building materials. Part of this thesis is also includes a seminar work on Single-layer flat roofs.
|
|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Storage area with administrative building
Šesták, Tomáš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.
|
guest ::
